Direct Vent - Multi-Fuel

Direct-Temp Multi-Fuel is a concentric direct vent system for bio-fuel burning appliances.

Available in 3" x 5" and 4" x 7" Diameters
Premium stainless steel inner
Stainless or painted galvanized outer
Silicone gasket seal

Direct-Temp Multi-Fuel converts any conventional biomass appliance into a Direct Vent system. This unique venting system is designed to withstand the corrosive flue gases obtained when burning bio-fuels. The all-stainless steel construction features an inner liner of superferritic Stainless Steel. A leak-proof connection is achieved with built-in silicone gaskets. The concentric design saves installation time by combining flue exhaust and combustion air intake. Provides maximum safety, longer product life, enhanced performance and value.

3"-4" Diameters:

29-4C Stainless steel inner flue
409 stainless steel outer or galvanized painted black
Integral Silicone seal - No sealant required
Concentric System
Preheats intake air for more efficient combustion
Laser welded seams
Smart Choice Warranty on all components

Approvals:

Listed to UL 641 in the U.S.A.

Adapters to use 4” & 5” Selkirk Direct Temp with the 4” & 5” Amerivent Direct Vent product line.

Adapters to use 4” & 5” Amerivent Direct Temp with the 4” & 5” Selkirk Direct Vent product line.

" href="https://www.youtube.com/watch?v=4jTFSp5sQxA" class="detail-image" >

Duravent Group Adapters: Amerivent Direct Vent to Selkirk Direct Temp

The following Adapters are available to convert an AMERIVENT Direct Vent system (ADV) to a Selkirk Model Direct Temp System (DT) or vise-versa. These Adaptors are available for 4" and 5" diameters, unpainted and painted.

Adapters to use 4” & 5” Selkirk Direct Temp with the 4” & 5” Amerivent Direct Vent product line.

Adapters to use 4” & 5” Amerivent Direct Temp with the 4” & 5” Selkirk Direct Vent product line.